Emtek Select Smooth Keyed Entry Door Lever Set with L-Square Stem

X The stem connects the lever to the rosette. The stem is permanently affixed to the lever.

X

  The backset describes the length of the latch itself. To determine this, start at the center of the borehole drilled in the door and measure to the edge of the door.

X

X

Most interior doors measure 1 3/8” thick, while most exterior doors measure 1 3/4” thick.

X

• Simply stand outside the room or house facing the door
• If the hinges are on the left, it is a Left-Hand Door lever
• If the hinges are on the right, it is a Right-Hand Door lever
• For single dummy's, stand on the side of the door you are placing the lever on and follow the same steps as above

X

Choose "Keyed Alike" to use the same key on mulitple locks or "Keyed Differently" to ensure that multiple locks will require different keys. If you require us to key a lock the same as an existing key, please enter the key code in the custom keying box.

 

Please contact customer service for assitance with master keying or keying multiple manufacturers the same.

X Select the finish (color) of the rosette. The rosette is the plate that goes behind the lever on the door.